Disposal; Plastics; Metals - Kemper Clean Air Tower Instrucciones De Uso

8 Disposal

CAUTION
Skin contact with dust and smoke originating from cutting, etc.
may result in irritation in sensitive individuals!
Disassembly works on the filtration device can only be performed
by trained and authorized professional personnel in compliance
with applicable safety instructions and accident prevention
regulations!
There is a risk of severe damage to the respiratory organs and
respiratory system!
In order to avoid contact and breathing of dust, use protective
clothing, gloves and breathing apparatus with ventilator such as
KEMPER autoflowXP or respiratory mask with filter of FFP2 class
according to EN 149.
Prevent in release of harmful dust at disassembly in order to
avoid damage of health of the persons who are not appointed to
carry out work.
WARNING
During all works on the filtration device and therewith, observe
legal obligations to avoid the generation of waste and provide for
proper recycling/disposal!

8.1 Plastics

Used plastics should be sorted out as much as possible.
Plastics should be disposed off while observing the duties imposed by law.

8.2 Metals

Separate various metals and dispose of them. Disposal should be carried out by an
authorized company.
Serial No.: 1502206
Technical modifications without previous notification and errors reserved.
KEMPER CleanAirTower Instruction manual - EN
- 79 - Rev.: 1
Status as of: 05/2014