TECshow NAVIGATOR EXPERT RDM Manual De Usuario página 18

Refer to the chart below for an RGBW moving head.
Fader/Wheel
1/R
2/G
3/G
4/W
5/D
6
7
8
9
Pan
Tilt
10
...
32
Table 6.2 Assignment of DMX channels to the control elements
Caution with spots that have no color mixing, no dimmer
channel or no movement. These function channels are
permanently assigned in the console and therefore need
to be properly assigned. For example, if a fixture has no
color mixing, channels 1/R, 2/G, 3/B and 4/W should be
set to zero and not be used for other functions. Otherwise
when using color effects you have no satisfying results.
Generally it is recommended to always proceed in the
same manner when setting various spots. Consider which
control functions the spots require and work out a fixed
scheme. Create a list of the required functions and sort
them according to the standard values of the console and
the desired assignments. Record the respective values of
the spots.
P. 18
NAVIGATOR EXPERT RDM
ENGLISH VERSION
Function
Red
Green
Blue
White
Dimmer
Shutter/Strobe
Movement Speed
Color Change
Color Change Speed
Horizontal Movement
Vertical Movement
-
-
Fixture Channel
8
9
10
11
12
6
5
12
13
1
3
Null
Null