Limescale Removal Operation - Gaggia Milano Anima Prestige Instrucciones De Uso

English
24

Limescale Removal Operation

When the display shows START CALC CLEAN, you have to perform the clean-
ing of the machine. If you do not perform the cleaning of the machine when
the display shows this message, the machine will stop functioning correctly.
In this case, any repair is not covered by the guarantee.
Use Gaggia descaling solution to remove scale from the machine. Gaggia
descaling solution has been designed to ensure excellent performances of
the machine. The use of other products may damage the machine and leave
residues in the water.
The operation of limescale removal lasts for about 30 minutes and consists
of a descaling cleaning cycle and a rinse cycle. You can pause the descaling
cleaning cycle or the rinse cycle by pressing the ESC button. To continue the
descaling cleaning cycle or the rinse cycle press the OK button.
Note: during limescale removal, do not remove the brew group.
Warning: do not ingest the descaling solution or the water dispensed during
limescale removal.
1 Remove "INTENZA+" filter.
2 Remove the drip tray and the coffee grounds drawer, empty, clean and
insert them into the machine again.
3 Place a large container (1.5 l) under the coffee dispensing spout.
4 When the display shows START CALC CLEAN, press the OK button to
start the limescale removal operation. Remove the hot water dispensing
spout, if any.
- The display indicates to insert the carafe.
- The display indicates to open the milk dispensing spout.
Note: you can press ESC to postpone the descaling clean. If you wish to start
the limescale removal later, press the MENU button, select MENU, press OK
and scroll until selecting START CALC CLEAN . Press OK to confirm.