English
26
Warning Icons and Error Codes
Meaning of the Warning Icons
Fill the tank using running water
up to the MAX level indication.
The coffee bean hopper is empty.
Insert the coffee beans in the
coffee bean hopper.
The brew group is not in the ma-
chine or it has not been inserted
correctly. Insert the brew group.
The hot water dispensing spout is
not installed. Insert the hot water
dispensing spout.
If an error is shown on the display,
refer to the "Meaning of the
Warning Icons" section to check
the meaning of the code shown
and how to proceed. You cannot
use the machine when the display
shows this icon.
Empty the coffee grounds drawer.
Wait about 5 seconds before
reinserting it.
3
Before preparing any beverage, perform a manual rinse cycle. To perform
a manual rinse cycle, dispense half a tank of hot water, then prepare 2
cups of pre-ground coffee without adding ground coffee.
Note: if this operation is not complete, it is necessary to perform another
limescale removal as soon as possible.
Warning icons are red. The list below reports the warning icons that the
display can show along with their meanings.
The milk carafe is not installed.
Insert the milk carafe into the
machine.
The coffee grounds drawer is full.
Check that the machine is on. Re-
move the coffee grounds drawer
and empty it.
The brew group is clogged by
coffee powder. Clean the brew
group.
Insert the drip tray and close the
maintenance door.