Fox F36-420 Manual De Instrucciones página 29

EXTENSION LEADS
Only use three conductors extension cables, with a plug with two pins and a earthing contact, and sockets with
two holes and a earth corresponding to tool's plug. When using an electric tool at a remarkable distance from
the power supply, use an extension lead with adequate size to transport the necessary current to the tool. If the
extension lead has not a sufficient size a voltage drop can occur, causing a power loss and thus motor
overheating. Only use extension leads in compliance with CE standards.
Extension lead length: ......................................................................................................................... up to 15 m
Cable size: ........................................................................................................................................... 3 x 2,5 mm²
Before using any kind of extension lead, check that it has not bare wires and that insulation is not cut or worn.
Repair and change immediately it if it is damaged or worn.
WARNING:
EXTENSION LEADS MUST BE ARRANGED AWAY FROM THE WORKING AREA IN
ORDER THAT THEY DO NOT COME IN CONTACT WITH THE WORKPIECES, THE TOOL
OR OTHER PARTS OF THE MACHINE, THUS CREATING POSSIBLE RISKS.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN
This tool has been designed and manufactured only to cut ceramic or clay tiles of small and medium size, for
floor and walls.
USE COMPLIANT TO THE STANDARDS
EN
23