Technical Specifications; Noise Conditions - Fox F36-420 Manual De Instrucciones

EN

TECHNICAL SPECIFICATIONS

Motor power: .................................................................................................................................................. 800 W
Voltage and frequency: ...................................................................................................................... 230 V - 50 Hz
Cutting disc diameter: .................................................................................................................................. 200 mm
Bore diameter: ........................................................................................................................................... 25,4 mm
Cutting width: ............................................................................................................................................... 2,8 mm
No-load rotational speed: ......................................................................................................................... 2950 RPM
Maximum cutting height: ................................................................................................................................ 30 mm
Mitre angle: .................................................................................................................................................... 0-180°
Bevel angle: ..................................................................................................................................................... 0-45°
Pump capacity: .............................................................................................................................................. 600 l/h
Workbench size: ................................................................................................................................ 785 x 395 mm
Net weight: .................................................................................................................................................... 30,4 kg

NOISE CONDITIONS

The noise emitted, measured in conformity with standards EN 3744 and EN 11201 is:
L
- Sound pressure level pA.................................................................................................................... db(A) < 75
- Uncertainty of measurement K .................................................................................................................. db(A) 3
We recommend you to use ear protection devices.
Tile cutter noise sources are: the electric motor and its ventilation system, the cutting disc and the material to
be cut.
As far as motor is concerned, take care to inspect it and its ventilation system, making sure that aspiration
inlets are clean.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if there is a
connection between emission levels and exposure levels, the first ones cannot be used to determine safely if
other precautions are necessary. Factors that can influence actual exposure level of the user include exposure
length, environmental features and other noise sources, as for example the number of machines and
operations in the surrounding area. Besides, exposure levels can change from country to country. However,
these instructions enable the user of the machine to better evaluate dangers and risks.
24