Using Your Air Conditioner; Control Panel Overview - Impecca IPAC16-BRB Manual De Usuario

USING YOUR AIR CONDITIONER

CONTROL PANEL OVERVIEW

IR Signal Receiver
Water Full indicator
MODE
MODE button
1. IR Signal receiver (Remote controller sensor)
2. Water condensation build-up alter (when illuminated)
3. Cooling A/C mode operation (when illuminated)
4. Temperature LED: Displays the desired room temperature during cooling mode. In
other modes, the display will be blank.
5. Dry/Dehumidifier mode operation (when illuminated)
6. Fan mode operation (when illuminated)
7. Mode button: Press the Mode button to cycle between AUTO, COOL, DRY, and FAN
mode.
8. Temperature +/- buttons: Set the desired room temperature by pressing the ap-
propriate button. Temperature changes are displayed in 1° increments in the
range of 61°F (16°C) and 86°F (30°C) Note: Temperature cannot be set when using
the fan or dehumidifier modes
9. Power ON/OFF button: Use this button to turn the unit on or off.
Basic operations can be performed directly by interfacing with the control panel but-
tons described above. For more advanced features and settings, you will need to use
the remote controller.
When the water tank is full a buzzer will sound eight times indicating that it is time to
drain the unit. an error code "
Cool Mode indicator
LED Display
/
H8
" will appear on the LED display screen.
–18– –18–
Dry Mode indicator
Fan Mode indicator
button
ON/OFF button
ON/OFF