Customer Support - Impecca IPAC16-BRB Manual De Usuario

Unit blows cold air but does not lower
room temperature
Unit is leaking
Unit runs for a while and then trips the
power cord or circuit breaker

CUSTOMER SUPPORT

Before contacting customer support, please see the troubleshooting guide above.
Visit our website to contact us, find answers to Frequently Asked Questions, and for
other resources which may include an updated version of this user's manual.
If you wish to contact us by phone, please be sure to have your model number and serial
number ready and call us between 9:00am and 6:00pm ET, at +1 866-954-4440.
Keep tabs on Impecca's newest innovations & enter contests via our social network feeds:
© 2016 Impecca, a division of LT Inc., Wilkes Barre, PA
• Unit must be properly vented.
• The room area may be too large. Min-
• Close any open windows or doors.
• Remove or shut off any heat generating
• Close any curtains or blinds to minimize
• Remove anything that is blocking the air
• Clean or replace air filter.
• Check to see if drain plug is not in place
• Inspect unit to see if the base pan is
• The unit may be plugged into an outlet

WWW.IMPECCA.COM

www.facebook.com/Impecca/

www.instagram.com/impecca/

@impeccausa
–27– –27–
imize the area to be cooled. Use more
than one unit to cool the area if the area
is too large.
sources such as electronics.
sunlight.
intake or exhaust ports
cracked.
that cannot supply the correct amount
of current. Test to see if the unit works
in a different room or circuit.