Publicidad
Idiomas disponibles
Idiomas disponibles
Display Angle Adjustment
1. Remove Irrigator and Bracket from the mounting plate to adjust the display angle .
2. Adjust the display angle by loosening the two tension adjustment screws with the 5/32" hex wrench provided
(see Figure 6) . Tilt mounting plate forward to desired angle and tighten the two tension adjustment screws to
lock in position .
Swivel Adjustment
To adjust the swivel tension, tighten or loosen the Swivel Tension Nut (see Figure 7) with a ½" (13 mm) socket
wrench (not included) .
Wiping
Wipe the exterior surfaces of the Irrigator Bracket and Pole Clamp as necessary with a soft, damp cloth or sponge .
Use 70% Isopropyl Alcohol wipes or a mild cleaning solution to remove stains or adhesives that stick to the
surface .
Service and Repair
The Bracket and Pole Clamp have no user serviceable parts . For service, repair or replacements, contact your local
Integra sales representative .
Product Lifetime
Replace the bracket and the pole clamp when any damage is noticed that may affect the functionality .
End of Useful Life
These products can be returned to Integra LifeSciences Corporation for recycling . Dispose of the equipment in
accordance with local ordinances .
Any serious incident that has occurred in relation to the device for the user and/or the patient should be report-
ed to the manufacturer and the competent authority of the member state in which the user and/or patient is
established .
PRODUCT INFORMATION DISCLOSURE
INTEGRA LIFESCIENCES CORPORATION ("INTEGRA") HAS EXERCISED REASONABLE CARE IN THE SELECTION
OF MATERIALS AND THE MANUFACTURE OF THESE PRODUCTS . INTEGRA WARRANTS THAT THESE PRODUCTS
Swivel Tension Nut
Figure 7
7
EN - ENGLISH
Publicidad
