Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
2. Pour the rinse aid into the dispenser, being careful not to overfill.
3. Close the cap after all.
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to
adjust the consumption by user. Follow the below steps.
1. Open the door, switch on the appliance.
2. Within 60 seconds after the appliance was switched on press the Rapid button for more
than 5 seconds, and then press the «+» button to enter the set model, the rinse aid indication
blinks as 1Hz frequency.
3. Press the Rapid button again to select the proper set according to your using habits, the
setting will change in the following sequence: D1->D2->D3->D4->D5->D1. The higher the
number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or press the Power button to complete the setup and exit
the setting mode.
33
EN
Publicidad
