Publicidad
Idiomas disponibles
Idiomas disponibles
- Fig. 10 -
- Check the rack for proper centring.
- Make sure the bottom ends are positioned correctly to-
wards the dome of the roof. Make sure the bottom ends
seat properly in the roof edge, remaining in this posi-
tion even after the clamping screws are tightened. The
bottom end must not jump out of the roof edge.
- If the bottom end is on the roof, the max. distance to the
rood edge can be 2 mm only (on both sides of the car).
Otherwise it has to be re-arranged. Were-
GB
Publicidad
