Publicidad
Idiomas disponibles
Idiomas disponibles
Press the key
the up or down key
once you have selected the new language, press
and then press the key
the temperature and humidity of the equipment.
4. Service, access this option to access and / or change the value of the
parameters, display internal values, alarms, cancel data memory
and restore parameters.
With the keys
key
in the menus and redisplay the temperature and humidity of the
equipment.
5.4.2.4 Access to auxiliary functions.
To be able to access the auxiliary functions of the thermostat, you must first unlock
the screen by pressing one of the display keys for a few seconds, the open padlock
symbol will appear when it is unlocked.
For DDAV-200 and DDAV-400 models:
Press the key for a few seconds
the keys
the key
to go out.
For the DDA-400 and DDA-750 models:
To enter auxiliary functions, press the key once.
access to the functions:
5. Manual defrost.
6. Overheating.
7. Extra HR contribution.
8. Energy saving.
Press the keys
confirm and press again
you must follow the same steps as for activation. To exit press the key
go back in the menus until the temperature and humidity of the equipment are
displayed.
5.4.2.5 Thaw
For DDAV-200 and DDAV-400 models:
This process is done automatically, but you will always have the option to
perform a defrost cycle manually by pressing and holding the button.
the defrost will be carried out manually as long as the values relative to this
function allow it.
ES
and you will enter the language selection. With
search for the language you prefer,
to go back in the menus and redisplay
select one of the options and press the
to be able to enter. To exit press the key
to access additional functions, using
select the function to display and press
to select any of the functions, then press thekey.
to enable the function. To cancel the enabled function,
to confirm
to go back
, press
, once pressed you will have
and it will
,
to
32
Publicidad
