Gude GSH 180-TC-2 Traducción Del Manual Original página 33

Caution! Never use a product that is
damaged! A damaged product does not
provide enough protection and may therefore
lead to injuries and/or accidents.
Beore each use, inspect the saety goggles with
regard to damage and service lie.
I the flter ickers or the level o darkening no longer
corresponds to the deault value or i other abnormal
working conditions predominate, the welding hel
met may no longer be used.
Ensure that this product is not exposed unnecessari
ly to sunshine.
Use only original accessories and original spare parts.
Components or which there are no instructions or
exchanging should be replaced by the manuacturer
only.
Caution! Using eye protection without a
lter eect against optical radiation damages
the eyes.
Beore each use, check whether the eye protec
tion shows the necessary number on the scale.
The welding helmet with automatic darkening is not
suitable or laser and gas welding.
Never place the welding helmet on hot suraces.
Do not open the welding helmet under any
circumstances.Repairs and works specifed in these
Instructions may only be perormed by qualifed
authorised sta.
Ensure that you have set automatic darkening beore
each welding process.
I the flter does not darken automatically, stop
the welding process immediately and contact the
manuacturer.
Replace the protective visor i it is scratched or
damaged.
The welding helmet does not protect against
impacts.
Caution! Materials that come into contact
with the wearer's skin may cause allergic
reactions in individuals with sensitivities.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
inuence o drugs, alcohol or medication.
The appliance must not be used i damaged or saety
equipment is deective. Replace any wornout and
damaged parts.
The device must not be operated i it is damaged in
any way.
Maintain power tools. Check or misalignment or
binding o moving parts, breakage o parts and any
other condition that may aect the power tool's ope
ration. I damaged, have the power tool repaired
beore use.
Eye protection devices worn to protect
against high-speed particles may constitute a
hazard for the wearer as a result of the transfer
of impact forces if worn over standard prescripti-
on glasses.
Caution! Risk of high-speed particles at
extreme temperatures.
Should protection against highspeed particles at
extreme temperatures be required, the eye pro
tection device selected must eature the letter T
right ater the letter or the impact intensity, i.e.
FT, BT or AT. I the letter or the impact intensity
is not ollowed by the letter T, the eye protection
device may be used only to protect against high
speed particles at room temperature.
Beore each commissioning, check whether the
welding helmet and the protective panel are intact.
I the protective panel has any scratches, cracks or
unevenness, it must be replaced beore use, or it may
cause serious injuries.
SYMBOLS
Read the operating instructions to redu
ce the risk o injury.
The appliance must be stored in a dry place
and protected rom rost.
Keep the machine out o reach o children.
Keep dry at all times. Never expose tool
to rain.
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
ENGLISH
29