OHAUS Frontier FC5707 Manual De Instrucciones página 7

TM
Frontier Centrifuge FC5707
1. INTRODUCTION
1.1 Description
Thank you for choosing this OHAUS product.
All symbols indicate safety instructions and points to potential dangerous situations. Please read the manual
completely before using the Frontier
Frontier TM 5707 centrifuge was designed for the separation of materials or mixtures with different density.
1.2 Features
TM
The Frontier FC5707 centrifuge offers many practical features such as:

Small footprint to save invaluable benchtop space

Ergonomic touch-wheel makes parameter adjustment fun

Splash-proof front panel can endure sample spill and is easy to clean

Intuitive control interface can be operated by one hand

All key parameters are visible at all times

Additional adapters can be added to extend accepted sample containers
1.3 Definition of Signal Warnings and Symbols
Safety notes are marked with signal words and warning symbols. These show safety issues and warnings. Ignoring
the safety notes may lead to personal injury, damage to the instrument, malfunctions and false results.
The degree of danger is a part of a safety note and distinguishes the possible results of non-observance from each
other.
Signal Words
DANGER
WARNING
CAUTION
ATTENTION
NOTE
Warning Symbols
General Hazard
Alternating Current
Explosion
Warning and information signs on the surface of centrifuge
TM
FC5707 to avoid incorrect operation.
Will lead to severe injuries or death if not avoided.
For a hazardous situation with medium risk, possibly resulting in injuries or death
if not avoided.
For a hazardous situation with low risk, resulting in damage to the device or
the property or in loss of data, or injuries if not avoided.
For important information about the product. May lead to equipment damage if not
avoided.
For useful information about the product
Four carrier must be used at all times on four place swing out rotors or damage will
occur to the centrifuge. Such damage will not be covered under the product
warranty.
Attention! Check the fastening of the rotor nut before each run.
Take off mains plug before opening the housing or the emergency release.
Electrical Shock Hazard
Biohazard
Crushing
EN-1