Publicidad
Idiomas disponibles
Idiomas disponibles
in exposure with the module disassembled. The laser unit complies with FDA21 cfr
1040.10 and 1040.11.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPEC IFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
Unpacking
Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
Package contents
A) Saw
B) Clamp
C) Wrench
D) Dust bag
E) Supports
F) User manual
Functional Description
WARNING:Disconnect the plug from the power source before making any
assembly, adjustments or changing accessories. Such preventive safety measures
reduce the risk of starting the tool accidentally.
Assembly
WARNING:Disconnect the plug from the power source before making any
assembly, adjustments or changing accessories.
Clamp
To install clamp simply insert it into the provided hole on the fence on the right or left
side depending on the cut you are doing and tighten nut. (Fig.1)
Dust bag
Squeeze metal clamp and place over dust outlet and release clamp. (Fig.2)
Supports
Insert supports in both ends of table and secure with screw. (Fig.3) And one stability
bar in rear of machine (Fig.9).
On-Off Switch
Ensure that the switch is in the "OFF" position. If the plug is connected to a receptacle
while the switch is in the "ON" position, the power tool will start operating immediately
and can cause serious injury.
To turn the saw on or off, squeeze and release the on/off switch. (Fig.4)
13
Publicidad
