Publicidad
Idiomas disponibles
Idiomas disponibles
■
Icon list
Displayed when "Energy saving operation"
is "ON".
Displayed when remote control sensor is
set. (*1)
Displayed when "Night operation" is "ON".
Displayed when operations are locked by
central control. (*1)
Displayed when "Saving operation" is
"ON".
Displayed when the Bluetooth
function is
®
"ON". Refer to the Owner's Manual of the
Bluetooth
®
function regarding Bluetooth
functions.
Displayed when a check code occurs. (*1)
It reaches the set temperature, and
displayed while the room temperature is
maintained.
*1: Refer to the Installation Manual of the wired remote control.
17-EN
1140602001_EN FR ES.indb 9
1140602001_EN FR ES.indb 9
Displayed when "Timer" is "ON".
Displayed when "Louvers lock" is set.
!
Displayed when it is time for filter
maintenance.
Displayed when "Soft Cooling" operation
is "ON".
Displayed for about 3 seconds when the
operation mode is changed in the "Mode"
screen when the operation mode is
restricted.
Displayed when "Air purifier" function is
®
"ON".
Displayed when a notice code occurs. (*1)
For details, contact your dealer.
It is displayed when a commercially
available ventilation unit connected to the
air conditioner is in operation.
– 9 –
4
Operation
■
Operations
■
Changing the set temperature
NOTE
• For the range of temperatures that can be set, refer to the Owner's Manual for the wired remote control.
• The temperature setting cannot be changed when "Fan" is set.
• If the operation mode is set to "Auto" and dual set point is set, refer to <Individual temperature settings for "Cool"
and "Heat" in auto operation modes (dual set point)>. Refer to the Owner's Manual for the wired remote control.
1
Push [
ON/OFF] to start operations
The operation LED lights.
2
Push [
] and [
] to select the item you
want to change
You can change the following items.
Setting temperatures
Operation mode
Fan speed
Wind direction
3
To stop operations, push [
ON/OFF]
again
1
Push [
] and [
] to switch to the "Set
temp." screen
2
Push [
] and [
] to change the
temperature setting
Push [
] to increase and push [
] to
decrease the set temperature.
4/22/23 4:50 PM
4/22/23 4:50 PM
18-EN
Publicidad
