Using The Executive Std/Executive Price Holding Payment Systems - Saeco MEGACOLD L Instrucciones De Uso

MEGACOLD L– Issue 01
9.6

USING THE EXECUTIVE STD/EXECUTIVE PRICE HOLDING PAYMENT SYSTEMS

Command 39 Filling in of the change giving tubes:
Proceed as follows:
5. Go into programming mode to display .................................................................................... Command 00
6. Key in 39 and press B
7. Insert the coins in the coin mechanism
8. Press again the pushbutton B
The decimal point in the prices that appear on the display must be set through the
payment system.
Executive Standard ⇒ Command 69 programmed at 0
The Executive standard payment system manages the prices directly in the machine and not on the payment
system.
For example, to set selection 21 at 30 pence, follow the instructions below:
1.1) Enter programming mode to display ..................................................................................... Command 00
1.2)
Key in 03 and press B to display ....................................................................................... Selection No. 00
1.3)
Key in 21 and press B to display ..................................................................................................... Price 00
1.4)
Key in 30 and press B to display ....................................................................................... Selection No. 00
If you wish to programme another selection, repeat the sequence from point 1.2. Alternatively, press A twice.
Executive price-holding ⇒ Command 69 programmed at 1
In the Executive price-holding, the prices are managed by the payment system.
In this case, it is necessary to copy the price table (price list) programmed on the payment system to
command 03 of the machine (from price 1 to price n) , while at Command 05 the prices will be matched to the
selection by referring to their number.
For example, to set the selection 11 at 35 pence, proceed as described below:
Let us assume that the second price set on the payment system is 35 pence.
1.1)
Enter programming mode to display ..................................................................................... Command 00
1.2) Key in 03 and press B to display ...................................................................................... Price Number 00
1.3) Key in 02 (second price) and press B to display ............................................................................. Price 00
1.4)
Key in 35 and press B to display ...................................................................................... Price Number 00
1.5)
Press A to display ................................................................................................................... Command 00
1.6) Key in 05 and press B to display ........................................................................................ Selection No 00
1.7) Key in 11 and press B to display ...................................................................................... Price Number 00
1.8)
Key in 02 (second price) and press B to display ................................................................ Selection No 00
If you wish to programme another selection, repeat the sequence from point 1.6. Alternatively press A twice.
Executive price-display ⇒ Command 69 programmed on 1.
In the Executive price-display payment system the prices are controlled by the payment system.
In Command 05 the prices referring to the number of the selection will be matched to the selection.
Example:
1.1) Type 05 and press ENTER, the screen displays .............................................................. Selection No. 00
1.2) Type the selection no. and press ENTER, the screen displays ........................................ Price Number 00
1.3) Type for example 02 (second price) and press ENTER, the screen displays .................. Selection No. 00
If you wish to program another selection repeat the sequence from point 1.1 otherwise press ESC twice.
39
E
N
G
L
I
S
H