Descargar Imprimir esta página

Tennant Speed Scrub 2101 Manual De Instrucciones página 22

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 66
2101
1.8
Emissions
The A-evaluated equivalent continuous sound
pressure level of this machine is 71 dB (A) for
mains-operated machines and 69 dB (A) for
battery-operated machines.
1.9
Sources of danger
When the machine is at a standstill, the brush
module must immediately be switched off so that
the floor covering is not damaged. Move care-
fully over thresholds and steps – the brush mod-
ule or the suction lips may become damaged.
Tilt the machine and move it using the two rear
transportation wheels until the threshold has
been crossed. The machine is only intended for
use on level surfaces with a maximum incline of
up to 2%.
1.10 Authorised operators
The machine must only be used by persons who
have been provided with instruction regarding its
use and who have been expressly commis-
sioned with its use. These persons should be at
least 18 years old.
1.11 Proper usage
speed scrub automatic cleaning machines are
exclusively intended for wet-cleaning hard, wa-
terproof floor coverings in the interior of build-
ings. The adherence to commissioning, operat-
ing, maintenance and repair regulations is a
prerequisite of proper usage. The operating per-
sonnel must be informed of these regulations. All
other usage is regarded as improper. The
manufacturer cannot be held liable for damage
which occurs as a result of this; the risk of this is
borne solely by the user. The machines may only
be used, maintained and repaired by persons
who are familiar with this and have been in-
formed of the risks. The relevant accident pre-
vention regulations and other generally recog-
nised safety-technical, industrial medicine and
legal road traffic regulations must be complied
with. Unauthorised amendments to the machine
preclude any liability on the part of the manu-
facturer for damage which occurs as a result of
this.
Home
1.12 Product liability
The operating personnel is expressly informed
that the machine must only be used according to
the instructions. If these instructions are contra-
vened, this is the sole responsibility of the oper-
ating personnel.
If original replacement parts are not used, un-
authorised interventions or technical amend-
ments are carried out, this is also the responsi-
bility of the operating personnel. The manufac-
turer cannot accept any liability for this.
21
Find... Go To..
1 Safety

Publicidad

loading