Descargar Imprimir esta página

Tennant Speed Scrub 2101 Manual De Instrucciones página 29

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 66
2101
3.7
Charging maintenance-free bat-
teries (Fig. 5)
(sealed/gel/dry)
Open the flap (31) for the battery charger plug
(32). Disconnect the battery charger plug (32)
from the battery connection plug (33). Connect
the battery charger plug (32) to the charger out-
put plug. Connect the battery charger to the
mains. The charging process takes approx. 12
hours. After the charging process, remove the
charger mains plug from the mains socket.
Check the condition of the batteries every week.
3.8
Filling the machine (Fig. 6)
Open the cover (1) and fold upwards and to the
rear. Close fresh water lever (11). Close soiled
water cock (9). Fill the fresh water tank (41). In
the case of atv machines, fill both tanks (41 and
42) up to the filling level mark (40). Prepare a
low-foam automatic cleaning agent according to
manufacturer's instructions and pour into the
fresh water tank.
Preparation: The manufacturer's
specifications must not be ex-
ceeded!
Recommendation: Use 10-15 %
less automatic cleaning agent than
specified by manufacturer.
In the case of machines with sole-
noid valves (type designation mv),
the fresh water circuit must be bled
after long periods of standstill.
To do this, see Chap. 3.13.
3.9
Connection to the mains (Fig. 7)
Insert socket (36) into the plug (37). Attach cable
tension release (34). Connect the mains plug
(35) to the mains.
Home
6
7
28
Find... Go To..
3 Operation

Publicidad

loading