Publicidad
Idiomas disponibles
Idiomas disponibles
• Press the V test key
press one of the voltage adjustment keys (
preprogrammed voltage (
voltage value.
• Press
to start the test. The equipment will start applying high
voltage and the high voltage LED (
test number will be displayed and then the measured resistance value:
Measured resistance
Applied voltage
Voltage selected
• Press
to complete the test. The results screen will appear:
Measured resistance
Applied voltage
Absorption rate
Capacitance
The capacitance value may take a few seconds to be calculated
The maximum continuous measurement time in the manual mode
is 95 minutes. After this period, the current test will automatically
be finalized (Stop).
to activate the step voltage adjustment then
,
,
or
MANUAL
U < 15 V
Vtest: 0.500
RMIN:----
06/03/2018
12:00
R= 5.14GΩ
Ua:
505 V
97.9nA
Ut:
500 V
37
or
). Select a
) or use
to adjust the
F49-11
) will light up. The
Leakage current
Elapsed time
00:17
Duration of the test
Leakage current
Polarization index
Publicidad
