Descargar Imprimir esta página

Elanto RAISE-LNTP952DINAGV2 Instrucciones De Uso Y De Montaje página 82

Publicidad

Wait for 5 seconds for the automatic confirmation. The time
countdown will be start on the timer display.
When time elapses the cooking zone will
automatically switch off, the timer display will show a flashing
«000» and an acoustic signal will be heard. Press the [+] or [-] key
on the timer area to stop the signals.
To disable the timer of a cooking zone press repeatedly and
simoultaneously the [+] and [-] keys on the timer area until the clock
symbol lights up beside the display of the desired cooking zone,
press again the timer [+] and [-] keys simoultaneously, then bring
the timer value back to «000» by using the timer [-] key. Wait for 5
seconds for the automatic confirmation.The clock Symbol beside the
cooking zone display goes off.
Egg timer/Reminder
When no cooking zone is active it is possible to set an acoustic
reminder which stays active after switching the appliance off.
When the Egg timer/Reminder function is active, the Timer function
cannot be selected.
To enable this function press simoultaneously the timer [+] and [-]
keys. The clock symbol lights up below the timer display.
Set the time, ranging from «1.00» (1 minute) to «1.59» (1 hour and 59
minutes), by pressing the [+] and [-] keys. Wait for 5 seconds for the
automatic confirmation. The time countdown will be shown on the
timer display.
When time elapses the display will show a flashing «000» and an
acoustic signal will be heard. Press the [+] or [-] key on the timer
area to stop the signals.
To disable the Egg timer/Reminder function press simoultaneously
POR
E L A N T O - N A T O I N I T A L I A
82

Publicidad

loading