Descargar Imprimir esta página

Elanto RAISE-LNTP952DINAGV2 Instrucciones De Uso Y De Montaje página 91

Publicidad

The hood must not be operated without the grease filters.
The exhausted air must not be conveyed in a duct used for
discharging fumes of appliances powered by energy Other than
electricity (heating systems, etc.).
WARNING: This appliance is not intended to be used with gas
hobs.
To discharge the exhausted air, regulations issued by
competente authorities must be followed.
If the product is not equipped with a plug or if, at the end of the
installation, the plug is not easily accessible, it is necessary to
arrange a device separating the product from the electrical
system. The contacts of this device must have an opening
distance of all the poles of at least 3 mm.
WARNING: Do not store liquids in the cabinet, under the induction
hob, where the electrical components of the appliance are
located. Leaks or spillovers on the electrical parts of the
appliance are a cause of electrical shocks.
Carrying out the cleaning operations without following the
instructions is a risk of fire.
FIRE RISK: Do not store any flammable material in the cabinet,
under the induction hob, where the electrical componentes of the
appliance are located.
Do not pull the electrical wires.
The flat cable connecting the main wiring assembly to the hob
must be placed on the rear of the hob, to preserve it from any
breakage.
POR
E L A N T O - N A T O I N I T A L I A
91

Publicidad

loading