Publicidad
Idiomas disponibles
Idiomas disponibles
37
overloading this product could result in serious injury or damage to property.
disasseMblY
reMove all gear and accessories.
• Use 5/32" hex wrench to loosen coupler sleeve screws,
open couplers.
• Remove hoops. If coupler housings remain attached to
hoops, pull the housings off the hoop.
• Slide coupler housings up. Open coupler sleeves and
remove.
• Remove floor screws from foot disks.
• Remove wall screws from wall plates or Universal Mounting
Plate. (If using Universal Mounting Plate, remove screws
from back of plate and detach vertical assembly.)
• Detach top tube by pulling top sleeve from the vertical pole.
• Remove sleeve and unscrew wall plate from top tube.
• Detach foot assembly by pulling bottom sleeve from the
vertical pole. Remove sleeve.
• Unscrew foot disk from foot tube.
• Disassemble hoops: Depress pegs in connectors and pull
side tubes away from hoops.
MondaY through fridaY, 7:00 aM to 5:00 pM, pst
to obtain a copy of this warranty, go online to www.yakima.com
1033348B-15/45
do not overload this product
approximate base unit load capacity:
800 lbs. evenly distributed over product
approximate hoop load capacity:
technical assistance or replaceMent parts
contact Your dealer or call (888)925-4621
this product is covered by YaKiMa's
"love it till You leave it" limited lifetime warranty
or email us at yakwarranty@yakima.com
K E E P
T H E S E
200 lbs. each hoop
or call (888) 925-4621
I N S T R U C T I O N S !
care and
Maintenance
Wipe with a wet cloth or use a
solution of soap and water. do
not use abrasive cleaners.
• Unit must be secured to walls at
four locations.
• If storing heavy items, feet must
be secured to the floor.
• Prior to each use check for any
loose parts, wear, or damage.
Discontinue use immediately
if the unit should become
damaged or malfunctions.
• Replace any cracked or bent
parts immediately.
Publicidad
