EVA Stampaggi EVSL8 Manual De Instrucciones página 32

Installation, use and maintenance manual
---- - WOOD BURNING STOVES
2 2 HANDLING AND UNPACKING HANDLING AND UNPACKING
ATTENTION ATTENTION
Unloading of the product must be performed using lifting means that are suitable and that have characteristics that
are consistent with the weight of the stove. The operator must make sure that during offloading and lifting of the stove
there are no persons or objects nearby. When unpacking, avoid damaging the product with cutters or blunt tools.
Keep the packaging out of the reach of children. Pay attention to the balance of the product given its size and weight.
When transporting do not position the product horizontally. Unloading of the
product must be performed using lifting means that are suitable and that
have characteristics that are consistent with the weight of the stove.
Unscrew the screws that secure it to the pallet from below and place the
stove in the dedicated position paying attention to any obstructions that may
hinder installation or damage the item.
INSTRUCTIONS FOR DISPOSAL OF THE PRODUCT AND PACKAGING INSTRUCTIONS FOR DISPOSAL OF THE PRODUCT AND PACKAGING
METALLIC PARTIES
METALLIC PARTIES
OTHER PARTIES
STRAP
PACKAGING PALLET
PLASTIC BAG and
PACKAGES
POLYSTYROL
3 3 MINIMUM INSTALLATION REQUIREMENTS MINIMUM INSTALLATION REQUIREMENTS
INTRODUCTION:
INSTALLATION WITH WALL FUME OUTLET IS PROHIBITED. INSTEAD THE FUME OUTLET MUST BE ROOF-
TYPE AS PROVIDED FOR BY NATIONAL REGULATIONS.
Eva Stampaggi S.r.l. assumes no responsibility for damage to persons and/or property caused by non-compliance
with the point highlighted above for products installed in a non-compliant manner.
Install the stove according to the regulations in force in the country of use.
For example, in Italy the UNI 10683 standard is in force, which includes 4 points:
1 preliminary activities - the duty and responsibility of the dealer/installer at the time of the inspection before the final
installation. Preliminary procedures include:
● installation site suitability verification;
● fume evacuation system suitability verification;
● checking of the suitability of the external air intakes;
● At this stage, the product needs to be checked in order that it can be safely operated and that the relevant technical
specifications are met. The safety conditions must be assessed with a preventive inspection. Stoves and fireplaces are
heating systems and as such must be installed safely and according to the manufacturer's instructions!
2 installation - the installer's responsibility. In this phase, the installation of the product and of the smoke evacuation system
are considered and the following issues are addressed:
● safety distance from combustible materials;
● construction of chimney flues, smoke channels, intubated systems and chimney cowls.
83103600 - 1.0 - 14/12/2022
The presence of this symbol applied to the product determines that it is NOT a refusal to be considered
generic, but must be demolished and disposed of in compliance with the rules in force in your country, making
sure that the collection centers are in accordance with the law and respectful of the environment. The
responsibility for such disposal is to be borne by the owner and to not incur sanctions or adverse effects on
the environment and health, we recommend you contact the local administration, the local waste disposal
center or the retailer directly to get more information about places and ways of collecting.
Proper waste disposal is important not only for the environment and the health of citizens, but also because
this operation leads to a recovery of materials that have significant energy and resource savings.
Transfer to a special collection centre in the Metal sector.
For proper disposal of waste electrical and electronic equipment (WEEE) consult WEEE Directive
2012/19/EU.
If it is non-recyclable waste, transfer it to a collection centre.
Separate collection (DRY) or transfer to a special collection centre.
Transfer to a special collection centre in the wood sector.
Separate collection (PLASTIC) or transfer to a special collection centre.
Separate collection (DRY) or transfer to a special collection centre.
EN EN
6 6