12
6.4
WARNINGS FOR THE INSTALLATION
The machine is sold without payment system. Therefore whatever default to the machine or
damages to person or things due to an incorrect installation, use or similar caused by the payment system
will be only and exlusively charged to those who have carried out the installation of the machine.
To install the coin mechanism, proceed following the example given in the diagram at the side:
1) Fasten the coin mechanism -A- to the supporting plate -B-, positioning it between the pins.
2) Press down the coin mechanism in order to block it securely.
3) Insert the coin mechanism and fastening plate in the guides provided -C- until they are firmly secured.
4) Press the knob -D- to secure the coin mechanism.
E
5) Connect the earth wire of the coin mechanism -F- to the earth wire of the machine.
N
6) Fasten the connectors -E- to connect the main board to the coin mechanism.
G
L
I
S
H
6.5
WARNINGS FOR THE DEMOLITION OF THE MACHINE
If the machine is disassembled in order to be definitively demolished, it is obligatory to follow the rules in
force regarding the protection of the environment.
All ferrous, plastic or similar materials should be taken to the authorized depots.
Particular care should be given to:
Should you have any queries, you are recommended to contact competent local refuse disposal authorities.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
1
2
Whichever type of gases (see identification plate) present in the refrigeration unit
should be recovered with suitable equpment by specialized firms.
Insulation materials should be recovered by specialized firms.
Disposal in compliance with EU 2002/96/EC standards, according to the implementation
of the Directive into the national law.
This equipment complies with Directive 2002/95/EC (RoHS).
FIG. 3
BABY FAS – Issue 04