Error Code - FAS BABY Manual De Instrucciones

BABY FAS – Issue 04
Command 91 Addition of machine code:
The command allows to insert the machine code. This 8-figure code is sent together with the other data to
the data fetch device and it is used to identify the machine.
Command 92 Reset sales data:
It allows to reset the sales data of the machine. This operation is subordinated to the insertion of a particular
access code. The procedure is as follows:
1. Go into programming mode to display........................................................................................ Command 00
2. Key in 92 and press B to display .................................................................................................... Code 0000
3. Key in 1221 and press B to display .........................................................................................DATA RESET?
4. Pressing B all sales data are reset whereas pressing A you return to the main menu letting the data
unchanged.
Command 94 Displays the last 10 power-offs:
This command displays the last 10 periods in which the machine has been put off.
The following values are displayed:
POWER OFF
POWER ON
To pass to another display press pushbutton B.
N.B.: The clock has to be programmed to obtain reliable values.
Command 99 Displays error events:
It displays the last 20 error events; press pushbutton B to pass from one display to another.

ERROR CODE

01
02
05
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
DATE TIME
DATE TIME
SUB-CODE
Number selection code
Number selection code
Number selection code
MEANING
Motor blocked (the spiral does not rotate)
The spiral does not complete the rotation
Motor disconnected
27
E
N
G
L
I
S
H