Publicidad
Idiomas disponibles
Idiomas disponibles
ABYSS IP66 Installation Instructions
If there isn't an existing outlet box, then install one using the following instructions:
•
Disconnect the power by removing the fuses or turning off the circuit breakers.
•
Secure the outlet box (A) (not included) directly to the building structure. Use appropriate fasteners and
materials (not included). The outlet box and its bracing must be able to fully support the weight of the
moving fan (at least 35 lbs). Do not use a plastic outlet box.
•
Figures 2-4 below show three different ways to mount the outlet box (A) (not included).
To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger
bar (C) as shown in Fig.4. Make sure the hanger bar you purchase has been designed for use with ceiling
fans.
ANGLED CEILING INSTALLATION
The hanging system of this fan is ONLY suitable for flat ceiling installation.
DO NOT install the fan on an angled ceiling.
3 | P a g e
INSTALLING THE MOUNTING BRACKET
Fig. 2
Fig. 3
Fig. 4
Publicidad
