Descargar Imprimir esta página

Qlima S20 Serie Instrucciones De Uso página 96

Publicidad

F
OPTIMAL OPERATION
To achieve optimal performance, please note the following:
Adjust the air flow direction correctly so that it is not directly directed to people.
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive tem-
perature levels.
Close doors and windows otherwise the desired effect may be reduced.
Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner may be
reduced and the air conditioner may stop running. Make sure there are no obstacles blocking the air
flow. The air stream must be allowed to reach the entire room unhindered. Also the air stream must
be allowed to reach the air conditioner unhindered.
Clean the air filter periodically, otherwise cooling or heating performance may be reduced. It is
advised to clean the filters every two weeks.
Do not operate unit with horizontal louvre in closed position.
G
ADJUSTING AIR FLOW DIRECTION
Range
Deflector rod
CAUTION!
Take care, do not touch the fan behind the vertical louvers!
To automatically swing the air flow direction (up - down)
Perform this function while the air conditioner is in operation.
Press the SWING  button on the remote controller.
To stop the function, press the SWING button  again. Press AIR DIRECTION  button to lock louver in
desired position.
4
96
Adjust the air flow direction properly otherwise, it might cause discomfort
or cause uneven room temperatures.
Adjust the horizontal louver using button  on the remote controller.
Adjust the vertical louver manually.
Adjusting the horizontal Air Flow Direction (up - down)
The air conditioner automatically adjusts the horizontal air flow direction in accord-
ance with the operating mode.
To set the horizontal air flow direction
Perform this function while the unit is in operation. Keep pressing the AIR DIRECTION
button  on the remote controller to move the louver to the desired direction.
Adjust the horizontal air flow direction to the desired direction.
In subsequent operations, the horizontal air flow is automatically set in the direc-
tion to which you adjusted the louver by pressing the AIR DIRECTION button.
To set the vertical air flow direction (left - right)
Adjust the vertical louver manually using the lever in the middle of the vertical
louver arm (depending on model). When the air conditioner is in operation and the
vertical louver is in a specific position, move the lever at left (or right, depending
on model) end of the air outlet to the desired position.

Publicidad

loading