Mondolfo Ferro As933 Manual De Uso página 26

INTRODUCTION
The purpose of this manual is to furnish
the owner and operator of this MONDOLFO
FERRO machine with a set of practical and
safe instructions for the use and mainte-
nance of the AS 933, AS 934, AS 943, AS
944 and AS 946 tyre changers.
Follow all the instructions carefully and
your tyre changer will assist you in your
work and give lasting and efficient ser-
vice in keeping with MONDOLFO FERRO
traditions.
The following paragraphs define the levels
of danger regarding the machine asso-
ciated with the warning captions found
in this manual:
DANGER
Refers to immediate danger with the
risk of serius injury or death.
WARNING
Dangers or unsafe procedures that can
cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that
can cause minor injuries or damage to
property.
Read these instructions carefully before
powering up the machine. Conserve this
manual and all illustrative material sup-
plied with the machine in a folder near the
tyre changer where it is readily accessible
for consultation by the machine operator.
The technical documentation supplied
is considered an integral part of the
machine; in the event of sale all relative
documentation must remain with the jack.
The manual is only to be considered valid
for the machine of the model and with the
serial number indicated on the nameplate
carried by the machine.
WARNING
Adhere to the contents of this manual:
MONDOLFO FERRO declines all liability
in the case of actions not specifically
described and authorised in this manual.
NOTE
26
E - Operator manual
nglIsh
Some of the illustrations in this manual
have been taken from photographs of
prototypes; the standard production
model may differ slightly in certain
respects.
These instructions are for the attention of
persons with basic mechanical skills. We
have therefore condensed the descriptions
of each operation by omitting detailed
instructions regarding, for example, how
to loosen or tighten the fixing devices on
the machine. Do not attempt to perform
operations unless properly qualified and
with suitable experience. In case of need,
please contact our nearest authorised
Service Centre for assistance.
TRANSPORT, STORAGE
AND HANDLING
Conditions for transporting the
The tyre changer must be transported
in its original packing and maintained in
the position shown on the outer packing.
AS 946 - AS 944 - AS 943 - AS 946
- Machine packing dimensions:
• width
• depth
• height
- Shipping weight:
• STD version
• T.I. version
AS 933 - AS 934
- Machine packing dimensions:
• width
• depth
• height
- Shipping weight:
• STD version
• T.I. version
Ambient conditions for storage and
transport
Temperature range from -25∞ to +55∞
As 933 - As 934 - As 943 - As 944 - As 946
machine
mm 1120
mm 1000
mm 970
kg 299
kg 313
mm 1120
mm 1000
mm 970
kg 285
Kg 299