DISC CHANGE
DISC DIRECT PLAY 1-3
i
_OPEN/
CLOSE
CD
CD EDIT/
CHECK
_1_1, I_1_
MULTI
JOG
EDIT/CHECK
RANDOM/
'0-9,+10
'SHIFT
LOADING
DISCS
Press CD, then press
•
OPEN/CLOSE
to open the
disc
compartment.
Load disc(s)
with the label side
up.
To play one or two discs, place the discs on tray 1 and 2.
To play three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing • OPEN/CLOSE.
('-- DISC CHANGE
Tray1
__
Tray number of the
disc to be played
Total playing time
Total number of tracks
To play one disc only, press DISC DIRECT PLAY 1-3.
The selected disc is played once.
To stop play, press m.
To pause play, press I|. To resume play, press again.
To search for a particular
point during playback, keep
or _
pressed and release it at the desired point.
To skip to the beginning
of a track during
playback, press
or _
repeatedly or turn MULTI JOG.
To remove discs, press --_ OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When --_ OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining
time
During play, press EDIT/CHECK on the remote control while
pressing SHIFT. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
* CD EDIT/CHECK
on the unit is also available
instead
of EDIT
CHECK on the remote control.
Selecting
a track with the remote control
1 Press DISC DIRECT PLAY 1-3 to select a disc.
2 Press numbered buttons 0-9 and +10 to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press ----. O PEN/CLOSE to close the disc compartment.
• When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
• Do not place more than one compact disc on one disc tray.
• Do not tilt the unit with discs loaded.
Doing so may cause
malfunctions.
PLAYING
DISCS
Load discs.
To play all discs in the disc compartment,
press _11_.
Play begins with the disc on tray 1.
Number of track being played
Elapsed playing time
9
ENGLISH