Publicidad
Idiomas disponibles
Idiomas disponibles
MULT
..................
i
5
•
i
8,10
3,7,8,g
1,10
LJ
In the programmed
edit recording
function
the tracks can be
programmed
while checking
the remaining
time on each side of
the tape.
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded on from the beginning of
either side.
1 Insert the tape into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
2 Press CD and load the disc(s).
Press EDIT/CHECK
twice while pressing SHIFT
on the remote
control.
"EDIT" and "PRGM" appear.
• When "Ar' is displayed, press EDIT/CHECK while pressing
SHIFT again.
Press
numbered
buttons
on the remote
control
to designate
the tape length.
10 to 99 minutes can be specified.
• The 4141, _
or MULTI JOG are also available to designate
the tape length.
Tape length
Tape side A (front side)
Maximum recording
time for side A
5 Press
DISC DIRECT
PLAY 1-3 to select a disc.
Then,
press
numbered
buttons
0-9 and + 10 on
the remote
control
to program
a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and 0.
Remaining time
Programmed
on side A
tracks
6 Repeat step 5 for the rest of the tracks for side
A.
A trackwhoseplayingtimeislongerthanthe remaining time
cannotbe programmed.
Press EDIT/CHECK while pressing SHIFT on the
remote control to select side B and program the
tracks for side B.
After confirming "B" on the display,repeatstep 5.
Tape side B (reverse side)
Press
EDIT/CHECK
while pressing
SHIFT to
select
side A and press
•
REC/REC
MUTE to
start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the last track programmed for side A
is finished, deck 2 enters the recording stop mode. After
entering the recording stop mode, go to step 9.
9 Press EDIT/CHECK while pressing SHIFT on the
remote control for recording of the second side.
"B" is displayed.
10 Turn over the tape in deck 2 and press •
REC/
REC MUTE to start recording.
Recording starts.
To stop recording
Press •. Recording and CD play stop simultaneously.
To check the order of the programmed
track numbers
Before recording, press EDIT/CHECK while pressing SHIFT on
the remote control to select side A or B, and press _
or
repeatedly.
Disc number Track number Program number
Tape side
Programmed track
numbers
To change the program of each side
Press EDIT/CHECK while pressing SHIFT on the remote control
to select side A or B, and press • CLEAR to clear the program
on the selected side. Then program tracks again.
To clear the edit program
Press • CLEAR twice so that "EDIT" disappears on the display.
* CD EDIT/CHECK on the unit is also available instead of EDIT CHECK
on the remote control
E>
15
ENGLISH
Publicidad
