Publicidad
Idiomas disponibles
Idiomas disponibles
--ENTER
--MULTIJOG
4 Select the duration for the timer-activated
period
with _
DOWN or _
UP, then press II SET.
5
The duration for the timer-activated
period can be set between
5 and 240 minutes
in 5-minute
steps.
Prepare
the source.
To listen to a CD load the disc to be played first on tray 1.
To listen to a tape, insert the tape into deck 1 or 2.
To listen to the radio, tune in to a station.
Press POWER to turn the unit off after adjusting
the volume and tone.
remains
on the display after the power is turned
off (timer
standby
mode).
The unit can be turned
on at a specified
time every day with the
built-in
timer.
Preparation
Make sure the clock is set correctly.
1 PressTIMER
repeatedly to display _, then press
II SET within 6 seconds.
_) is displayed
and the hour flashes.
If you press II SET after 6 seconds,
another
operation may
start.
2 Designate
the hour of the timer-on
time by
pressing _
DOWN or I_
UP, then press II
SET.
Repeat to designate the minute of the timer-on
time.
When the timer-on time is reached, the unit turns on and
begins play with the selected source.
The volume level is automatically set to 20 when the power is
turned off with the volume level set to 21 or more.
To check
the specified
time
and source
Press TIMER. The timer-on time, the selected
source name and
the duration
for the timer-activated
period
are displayed
for 4
seconds.
To cancel timer standby mode temporarily
Press TIMER repeatedly until (_ or _)REC disappears on the
display.
To restore the timer standby mode, press TIMER once or twice
to display _) or _)REC.
Using the unit while the timer is set
You can use the unit normally after setting the timer.
Before turning the power off, carry out step 5 to prepare the
source, and adjust the volume and tone.
• Timer playback
and timer
recording
will not begin unless
the
power is turned
off.
• Connected
equipment
cannot be turned on and off by the built-
in timer of this unit.
Use an external timer.
After you designate the timer-on time, one of the source names
flashes on the display.
3 Press
_
DOWN
or _
UP to select
a source,
then
press
|| SET.
• If TUNER (AM or FM) is selected, the band cannot be
selected in this step.
TIMER
RECORDING
Timer recording
is applicable
for TUNER
and VIDEO/AUX
(with
an external timer) sources
only.
Press TIMER repeatedly
until _REC
appears,
then press II
SET within
6 seconds.
Carry out the steps of "SETTING
THE
TIMER"
from step 2 and insert the tape to be recorded
on into
deck 2 after step 5.
* ENTER
is also available
instead
of I!
SET.
* MULTI
JOG
is also available
instead
of _
and _.
19
ENGLISH
Publicidad
