Speaker
system
SX-NA502
Cabinet type
Main unit CX-NA508
FM tuner
section
Tuning range
Usable sensivity (IHF)
Antenna terminals
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
AM tuner section
Tuning range
Usable sensitivity
Antenna
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 IJV/m
Loop antenna
Amplifier section
Power output
Total harmonic
distortion
Inputs
Outputs
60 W + 60 W (50 Hz - 20 kHz, THD
less than 1%, 6 ohms)
0.05 % (50W, 1 kHz, 6 ohms, DIN
AUDIO)
VlDEO/AUX:
150 mV (adjustable)
MD: 150 mV (adjustable)
MIC: 1.8 mV (10 k ohms)
LINE OUT: 200 mV
SUPER WOOFERS:
1.9V
SPEAKERS:
accept speakers of 6
ohms or more
SURROUND
SPEAKERS:
accept speakers of 8 ohms to 16
ohms
PHONES (stereo jack): accepts
headphones
of 32 ohms or more
Cassette
deck section
Track format
Frequency
response
Recording
system
Heads
4 tracks, 2 channels stereo
50 Hz - 15000 Hz
AC bias
Deck 1 : Playback head x 1
Deck 2: Recording/playback
head
x 1, erase head × 1
Compact
disc player
section
Laser
Semiconductor
laser (k = 780 nm)
D-A converter
1 bit dual
Signal-to-noise
ratio
85 dB (1 kHz, 0 dB)
Harmonic distortion
0.05 % (1 kHz, 0 dB)
Wow and flutter
Unmeasurable
General
Power requirements
Power consumption
Dimensions
of main unit
(W x H x D)
Weight of main unit
120 V AC, 60 Hz
100 W
260 x 329.1 × 344.5 mm
(101/4
×
13 × 13% in.)
6.4 kg (14 Ibs 2 oz.)
Speakers
Impedance
Output sound pressure
level
Dimensions
(W × H × D)
Weight
3 way,
bass
reflex
(magnetic
shielded type)
Woofer:
140 mm (5 5/8 in.) cone type
Tweeter:
60 mm (2 3/ain.) cone type
Super tweeter:
10 mm (13/32in.) ceramic type
6 ohms
87 dB/W/m
235 x 324 × 250 mm
(9 3/8× 12 z/8 x 9 7/8 in.)
3.3 kg (7 Ibs 4 oz.)
Specifications
and external appearance are subject to change without
notice.
BB_'SYSTEM
The word "BBE" and the "BBE symbol"
are trademarks
of BBE
Sound,
Inc.
Under license from BBE Sound,
Inc.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment
has been tested and found to comply with the
limits for a Class B digital device,
pursuant
to Part 15 of the FCC
Rules. These limits are designed
to provide reasonable
protection
against
harmful
interference
in a residential
installation.
This equipment
generates,
uses, and can radiate radio frequency
energy
and,
if not installed
and used in accordance
with the
instructions,
may
cause
harmful
interference
to
radio
communications.
However,
there
is no guarantee
that
interference
will not occur
in a particular
installation.
If this
equipment
does cause harmful
interference
to radio or television
reception,
which can be determined
by turning
the equipment
off and on, the user is encouraged
to try to correct the interference
by one or more of the following
measures:
- Reorient
or relocate
the receiving
antenna.
- Increase the separation
between the equipment and receiver,
- Connect the equipment
into an outlet on circuit different from
that to which the receiver
is connected.
- Consult
the dealer
or an experienced
radio/TV
technician
for help.
CAUTION
Modifications
or adjustments
to this
product,
which
are not
expressly
approved
by the manufacturer,
may void the user's
right or authority
to operate
this product.
ENGUS. 22