Sony MDS-S39 Manual De Instrucciones página 17

Playing MDs
Using the Display
You can use the display to check disc and track
information such as the total track number, total
playing time of the tracks, remaining recordable time
of the disc and disc name.
~_
DISPLAY/CHAR
SCROLL
DISPLAY SCROLL
Checking the total track number, total disc
playing time, remaining recordable time of
the disc and the title of the disc
Each time you press DISPLAY /CHAR (or DISPLAY)
while the deck is stopped, you can change the display
as follows:
Total track number and total playing
time of all recorded tracks
13
vy Press
Remaining recordable time of the disc
(Recorded MDs only)
Load
don weiss
The remaining recordable time of the disc
is not shown for premastered MDs.
584 Press
Disc name
LOWERS
123465
67 6 910
11:12:13 14 15
Press
Le 2
Oe met
When you insert an MD, the disc name, total number
of tracks, and total disc playing time appear in the
display as follows:
Disc name Music calendar
yp aeerer
v
Total disc playing time
Total number of tracks
The disc name appears, followed by the total number
of tracks (Tr) and total disc playing time.
A music calendar showing all the track numbers
appears within a grid if the MD is a premastered disc,
or without a grid if the MD is a recordable disc.
If the total track number exceeds 25, P appears to the
right of number 25 in the music calendar.
To label a recordable disc and its tracks, see "Labeling
Recordings" on page 29.
Note
When you insert a new MD or turn off the deck and turn it
on again, the last item displayed will reappear.
If, however, you disconnect the AC power cord, the display
will show the total track number and total playing time of all
recorded tracks the next time you turn on the deck, no
matter what the last display was.
(Continued)
17%