Playing MDs
ES
ee
ea
ee)
5
Set the timer as required.
Playing an MD
Using a Timer
* When you have set the time for the start of
playback, the deck turns off. When the
By connecting a timer (not supplied) to the deck, you
specified time arrives, the deck turns on and
the deck stops playing and turns off.
6
After you have finished using the timer, set
TIMER on the deck to OFF.
Note
You can select Program Play in Step 2. Note, however, that
programs eventually fade away when the standby status is
off, and therefore if you set the time too far in the future, the
program may be gone when the specified time arrives. If
this has occurred, the deck enters normal play mode at the
specified time and the tracks play in consecutive order.
1
DoSteps 1 to 3 in "Playing an MD" on page 8.
2
Press PLAY MODE repeatedly (or one of the
PLAY MODE buttons once) to select the play
mode' you want.
To play only specific tracks, create a program (see
page 21).
a
3 « If you want to specify the time for the start of
playback, go to Step 4.
¢ If you want to specify the time for the end of
playback, press Pil (or >) to start playback,
then go to Step 4.
¢ If you want to specify the time for both start
and end of playback, go to Step 4.
4
Set TIMER on the deck to PLAY.
23%