Sony MDS-S39 Manual De Instrucciones página 36

Guide to the Serial Copy
Management System
This MD deck uses the Serial Copy Management
System, which allows only first-generation digital
copies to be made of premastered software via the
deck's digital input jack. An outline of this system
appears below:
1 You can record from digital program sources (CDs, DATs
or premastered MDs) onto a DAT tape or recordable MD
via digital input jack on the DAT or MD deck.
CO player DAT deck
Playing
Optical cable or Digital output jack
coaxial digital
connecting cable
Digital input jack
Recording pra
first-generation
DAT tape or MD
recorded via
digital-to-digital
connection
DAT or MD |
be : Playing pio
Digital output jack Line (analog) output jacks
Digital input jack Line (analog) input jacks
Recording aatlenenel
3 66"
2 You can record the digital input signal of a digital satellite
broadcast onto a DAT tape or recordable MD via the
digital input jack on the DAT or MD deck which is capable
of handling a sampling frequency of 32 kHz or 48 kHz.
You can then record the contents of this recorded DAT
tape or MD (first-generation) onto another DAT tape or
recordable MD via digital input jack on the DAT or MD
deck to create a second-generation digital copy.
Subsequent recording from the second-generation copy
onto another recordable DAT tape or MD is possible only
through the analog input jack on the DAT or MD deck.
Note, however, that on some BS tuners, second-generation
digital copying may not be possible.
Digital output jack
Optical cable or
coaxial digital
connecting cable
di jn==ciip
Digital input jack
¥
First-generation
DAT tape or MD
'll recorded via
} digital-to-digital
connection
ae eid
Digital output jack
DAT or MD
Optical cable or
coaxial digital
connecting cable
Digital input jack
v Second-
generation DAT
tape or MD
recorded via
75 digital-to-digital
v connection
Playing DAT deck or
MD deck
Digital output jack —_Line (analog) output jacks
DAT or MD
Digital input jack Line (analog) input jacks