Publicidad
Idiomas disponibles
Idiomas disponibles
Editing Recorded MDs
Erasing all titles on a disc
(Name Erase Function)
Use this function to erase all titles on an MD
simultaneously.
1
Press EDIT/NO repeatedly while the deck is
stopped until "All Erase ?" appears in the display.
e-
2
Press EDIT/NO again.
"Name Erase ?" appears in the display.
3
Press YES.
All titles are erased.
To cancel the Name Erase Function
Press @.
Key You can undo a name erasion
See "Undoing the Last Edit" on this page.
coy You can erase all recorded tracks and titles
See "Erasing all tracks on an MD" on page 25.
Undoing the Last Edit
(Undo Function)
You can use the Undo Function to cancel the last edit
and restore the contents of the MD to the condition that
existed before editing was done. Note, however, that
you cannot undo an edit if you do any of the following
after the edit:
¢ Press the @ button on the front panel.
¢ Press the @ button, the MUSIC SYNC button, or the
CD-SYNC STANDBY button on the remote.
* Update the TOC by turning off the power or ejecting
the MD.
¢ Disconnect the AC power cord.
EDIT/NO
YES
1
With the deck stopped and no track number
appearing in the display, press EDIT /NO
repeatedly until "Undo ?" appears in the display.
"Undo ?" does not appear if no editing has been
done.
2 Press YES.
One of the following messages appears in the
display, depending on the type of editing to be
undone:
Editing done:
Message:
Erasing a single track
Erasing all tracks on an MD
"Erase Undo ?"
Erasing a portion of a track
Dividing a track
"Divide Undo ?"
Combining tracks
"Combine Undo ?"
Moving a track
"Move Undo ?"
Labeling a track or an MD
Changing an existing title
"Name Undo ?"
Erasing all titles on an MD
3
Press YES again. _
"Complete" appears for a few seconds and the
contents of the MD are restored to the condition
.
that existed before the edit.
To cancel the Undo Function
Press EDIT/NO or @.
31
Publicidad
