AMSTRAD SRX 350 Manual De Instrucciones página 32

[ 4 CUSTOMISATION
|
CHANNEL CUSTOMISATION
To change individual channel settings, follow these instructions:
Select channel.
Press SET-UP until you see picture similar to:
To adjust current setting (flashing), press SELECT + or —
(hold the button down to adjust quickly).
To confirm current setting and move on to next setting,
press OK.
6 © @090
When all settings are as required, press EXIT.
NOTES
- CH LOCK sets parental lock.
- CH SKIP sets whether channel is skipped by channel selection buttons.
- CH FREQ selects frequency (in GHz).
- VV POL sets polarisation (horizontal or vertical).
- AUDIO MODE selects soundtrack subcarrier.
- SYSTEM sets tuner to receive PAL, MAC or radio broadcasts.
- VID DEVIATION sets picture contrast level.
- CUSTOMISE CH selects channel number.
- CH NAME selects the channel name characters.
- LNB selects LNB input and local oscillator (dependent on LNB fitted).
- | To abandon customisation at any point, press STANDBY.
FURTHER INFORMATION - SECTION I5G
GB- 1!