40 CARE AND CLEANING
Removing
fhe
Drawer
Replacing
fhe
Drawer
WARNING
-
Disconnect
the electrical
power to the range at
/
the main fuse or circuit
breaker panel. Failure to
/
do so can result in severe personal injury, death, or
electrical
shock,
Most cleaning
can be done with the drawer in place;
however,
the drawer
may be removed
if further
cleaning
is needed.
Use warm water to thoroughly
clean.
1. Fully open the drawer.
2. Remove the two screws.
1. Pull the bearing glides to the front of the chassis
glide.
2. Align the glide on each side of the drawer with the
glide slots on the range.
3. Push the drawer into the range until levers "click"
(approximately 2 inch).
4. Pull the drawer
open again to seat bearing
glides
into position.
5, Replace the two screws.
3. Locate the glide lever on each side of the drawer.
Push down on the left glide lever and pull up on the
right glide lever.
Push down with finger
Pull up with finger
4. Pull the warming
drawer away from the range.