LG LRE3027ST Manual Del Usuario página 44

44
TROUBLESHOOTING
Oven smokes excessively
during broiling.
Food does not bake or roast
properly.
Food does not broil properly.
Food does not broil properly.
Displayed Time is flashing.
Control not set properly. Refer to the "Using the oven" section.
Meat is too close to the broil element. Reposition the rack to provide proper clearance
between the meat and the element.
, Meat is not properly prepared. Remove excess fat from meat. Cut remaining fatty edges to
prevent curling.
Broiler pan is upside down and the grease is not draining. Always place the grid on the
broiler pan with ribs up and slots down to allow grease to drip into the pan.
Grease has built up on oven surfaces. Regular cleaning is necessary when broiling
frequently.
Old grease or food spatters cause excessive smoking. Clean the interior of the oven.
o
o
o
o
o
Oven controls improperly set. See the "Using the oven" section.
Rack position is incorrect or the rack is not level. Refer to the "Rack and Pan Placement"
section.
Incorrect cookware or cookware of improper size being used. Refer to the "Using the
proper cookware" section.
Improper rack position being used. Refer to the "Removing and replacing oven racks"
section.
Cookware not suited for broiling.
Aluminum foil used on the broiling pan and grid has not been fitted properly and slit as
recommended.
In some areas the power voltage may be low. Preheat the broil element for 5-7 minutes.
Refer to the Broiling Guide.
This is normal. This means that the product has just been plugged in, or that it has
experienced a power interruption. To clear the flashing time, press any button and reset
the clock if needed.
Oven control displays PF " "PF" means there has been a power interruption in your home. Press the CLEAR OFF
message, button and the ON OFF button on the cooktop controls to clear this code. It may also
require you to reset the time for the display.
Oven temperature too hot or _ Oven Sensor needs to be adjusted. Refer to the "Using the oven" section.
too cold.
o
o
o
Scratches or abrasions on
cooktop surface.
Metal marks.
Coarse particles such as salt or sand between cooktop and utensils can cause
scratches.
Be sure cooktop surface and bottoms of utensils are clean before usage. Small
scratches do not affect cooking and will become less visible with time.
Cleaning materials not recommended for ceramic-glass cooktop have been used. Refer
to the "Care and Cleaning" section.
Cookware with rough bottom has been used. Use smooth, fiat-bottomed cookware.
Scraping of metal utensils on cooktop surface. Do not slide metal utensils on cooktop
surface. Use a ceramic-glass cooktop cleaning creme to remove the marks.
, Refer to the "Care and Cleaning" section.