Publicidad
Inserting Batteries into the
si -rane)¢om Oxolanlact-lalel=ag
You can control the unit with the supplied
remote commander.
Insert two R6 (side AA) batteries with the
polarity correctly aligned.
1 Slide the cover to remove it.
2 insert two R6 (size AA) batteries
correctly so that the ® and ©
polarities match the polarity
diagrams inside the battery
compartment.
On battery life
¢ About half a year of normal operation can
be expected when using Sony SUM-3
(NS) batteries.
¢ When the batteries are run down, the
remote commander will not operate the
unit. In this case. replace both batteries
with new ones.
Notes on the remote commander and
remote control operation
¢ Keep the commander away from
extremely hot or humid places.
¢ Avoid dropping any foreign objects into
the commander casing, particularly when
replacing the batteries.
¢ Avoid exposing the remote sensor to
direct sunhght or lighting apparatuses.
Such exposure may cause a malfunction.
¢ To avoid damage caused by battery
leakage and corrosion, remove the
batteries when the commander will not be
used for a long time.
Publicidad
