Publicidad
VARIABLE
LINE OUT
slteiny-\aneleas
COP-XS505ES/X303ES/X202ES
|
FIXED LINE OUT
SPEAKERS
Hooking Up the
System
You can connect the unit with an analog or
digital signal depending on your amplifier or
D/A converter.
Notes on Connection
¢ Turn off the power of each unit before
making connections. Connect the AC
power cord last.
¢ Be sure to insert the plugs firmly into the
jacks. Loose connections may cause hum
and noise.
¢ Leave a little slack in the connecting cord
to allow for inadvertent impact or
vibration,
© The supplied audio cord plugs and jacks
are color coded. Red plugs and jacks are
for the right channel (R) and white ones
are for the left channel (L).
Connecting Directly to an
Amplifer Ey
a) Speaker system
b) Amplifier
Cc) to an AC outlet
When using the LINE OUT
FIXED: The output level is fixed.
VARIABLE: The output level can be
adjusted with the LINE OUT /PHONE
LEVEL contro! ( or the LINE OUT LEVEL
+/- on the remote commander).
Notes on LINE OUT
¢ Connect your system to the VARIABLE
output when using Level file.
¢ If the LINE OUT/PHONE LEVEL control
(or the LINE OUT LEVEL +/-)is
adjusted while recording, the recording
level will change even when it 1s preset on
the tape deck.
When using the DIGITAL OUT EI
When connecting to an amplifier or D/A
converter with OPTICAL IN . use DIGITAL
OUT (OPTICAL) instead of LINE OUT.
Take off the cap, and plug in firmly.
Note on DIGITAL OUT (OPTICAL)
¢ When connecting with DIGITAL OUT
(OPTICAL). use the POC-15 audio optical
connecting cord (not supplied).
¢ Note that when the digital out 1s
connected, fade out, fade in, time fade
and level file functions cannot be used.
© Note that there may be some noise when
you play a CD software other than music
(such as a CD-ROM).
Publicidad
