Publicidad
Receiving
Broadcasts
(continued)
To select the settings of the
antenna attenuator, IF band and/
or FM MODE button (ST-S361
only).
There are two ways to select them; ASM
(Active Selection Mode) and manual
selection. If you turn the ASM function
on ({@-1), the tuner automatically selects
the optimum settings of the antenna
attenuator (ON or OFF), IF band (Wide
or Narrow) and FM MODE button
(MUTING or MONO) according to the
Follow the procedures (9-1 or [4-2
below to carry out these settings.
[9-1 Setting the ASM function
1 Press MENU.
2 Rotate the TUNING/SELECT knob
until "Reception" appears and then
press ENTER.
3 Press ENTER. "A. 5. M." appears.
4 Select "A. S. M.: ON" by rotating the
TUNING/SELECT
C3
Even when ASM is turned on, you can
3
change the FM MODE button setting, if
necessary.
To cancel ASM, select "A. S. M.: OFF" in
re
4
TUNING/SELECT
(to be comtinued)
28
Publicidad
