Publicidad
42
3 TUNING/SELECT
ye
4
TUNING/SELECT
6, 7
ST-$361
ST-S261
ENTER
Preset Tuning
Assigning Names to Stored
Stations
This procedure shows you how to assign a
name of up to 5 characters for each stored
station except the FM RDS stations. When
you tune in a stored station by using the
procedure on page 40, the name appears on
the display instead of the frequency.
1 Tune in a preset station except the
FM RDS stations.
See page 40.
2 Press MENU.
3 Rotate the TUNING/SELECT knob
until "Character" (ST-S361) or
"CHAR" (ST-S261) appears and
then press ENTER.
4 Rotate the TUNING/SELECT knob
until the desired character
appears and then press MEMORY/
NEXT.
The first character stops blinking and
the cursor of the second position blinks.
The list of characters you can choose
from is shown on the next page.
To search forward through the list, turn
the knob clockwise. To search backward
through the list, turn the knob
counterclockwise.
5 Repeat step 4 until you obtain the
desired name.
6 Press ENTER.
The name you created is set amd the
preset code in which the nane will be
stored blinks.
7 Press ENTER again.
(to becontinued)
Publicidad
