Kohler K-11830 Guia Del Usuario página 12

Ell
Elbow
Escutcheon
Outlet
Inlet
8. Install the Supply Hoses
IMPORTANT! It is critical that the inlet and outlet holes be aligned
correctly. The outlet is identified with a label on the top of the
control box.
Slide the escutcheon over the elbow and attach the elbow to the
ell.
Slide the escutcheon tight against the wall.
Attach one end of the hose to the elbow and attach the other end
of the hose to the control box outlet.
Attach the supply hose to the control box inlet.
Verify that the control stop is fully open by turning the setscrew
counterclockwise.
NOTE: If the water supply does not route through a mixing valve,
the water from the faucet will be cold.
Attach the other end of the line to a thermostatic mixing valve
(recommended), mixing valve, or supply stop.
1124216-2-C
Outlet
Solenoid
Control Stop
Setscrew
Inlet
12 Kohler Co.