Kohler K-11830 Guia Del Usuario página 4

Determine the Sensor Location (cont.)
IMPORTANT! It is critical for proper operation that the sensor be
installed with the motion zone clear of any obstructions, including
the edge of the countertop or the bathroom sink.
Measure the distance (X) from the finished wall to the inside edge
of the countertop or bathroom sink.
Determine the sensor height (Y) using the chart below. If you
cannot determine Y from the chart, use the formula .5" + X(0.364)
to determine (Y).
If dimension X is: Then the sensor height (Y) is:
1" (25 mm)
2" (51 mm)
3" (76 mm)
4" (102 mm)
5" (127 mm)
6" (151 mm)
7" (179 mm)
8" (203 mm)
9" (229 mm)
1124216-2-C
7/8" (48 mm)
1-1/4" (32 mm)
1-9/16" (40 mm)
2" (51 mm)
2-3/8" (60 mm)
2-9/16" (65 mm)
3" (76 mm)
3-7/16" (87 mm)
3-3/4" (95 mm)
4 Kohler Co.