Kohler K-11830 Guia Del Usuario página 13

Solenoid
Wires
9. Install the Hybrid Energy Cell
IMPORTANT! Avoid the area in front of the sensor for 2 minutes
after the connections are complete. If the sensor was triggered
within 2 minutes, disconnect and reconnect the power to reset the
sensor.
Connect the solenoid wires (green and red).
Connect the Hybrid Energy Cell (HEC) wires (black and orange).
Position the wires so they do not get pinched.
Reinstall the cover with the four screws.
Allow 2 minutes for the sensor to cycle through the automatic
sensing distance.
Kohler Co.
HEC
Wires
13 1124216-2-C