cecotec BOLERO COOLMARKET 2D Origin 86 Manual De Instrucciones página 53

- If the refrigerator will not be used for a long period of time, unplug it from the mains, empty
all food, and clean the appliance, leaving the door ajar to avoid unpleasant odours.
Power failure or cooling system fault
Try to open the refrigerator door as little as possible, so that you can keep food in good
-
condition for hours, even in summer.
- If you receive an early power failure warning:
1. Set the thermostat knob to the highest setting one hour in advance (do not store new food
during this time!). Set the temperature back to the original setting when the power supply
returns to normal.
2. You can also make ice in an airtight container and place it on the top chamber of the
refrigerator to extend the shelf life of fresh food.
Note:
Once you start using the refrigerator, it is best to use it continuously to lengthen its service life.
7. TROUBLESHOOTING
For the following minor malfunctions, please try to solve the problem yourself before
contacting the official Cecotec Technical Support Service.
Fault Possible causes
The appliance is not connected to the
The
mains.
appliance
The switches in the electrical
does not
installation or the fuses are damaged.
work.
There is no power or the fuse trips.
The refrigerator is not stable.
Abnormal
The refrigerator is too close to the
noise.
wall.
The food inside is hot or there is too
much food.
You open the door too often.
The door gasket has objects that do
Low cooling
not allow to close it completely.
efficiency.
The appliance receives direct sunlight
or is close to a heat source.
It is not well ventilated.
The selected temperature is too high.
BOLERO COOLMARKET 2D ORIGIN 86 RED/BEIGE/BLACK/BLUE/GREEN
Possible solutions
Plug the appliance into the main
socket.
Power outage or line
disconnection.
Set the adjustable feet of the
refrigerator.
Separate the refrigerator from
the wall.
Store food in the refrigerator
when at room temperature.
Check and close the door.
Remove the refrigerator from
the heat source.
Ventilate the room.
Correct temperature settings.
ENGLISH
53