Publicidad
EN
PRECAUTIONS AND SAFETY FEATURES
Machine design has taken into account all reasonable user safety precautions; nev-
ertheless, particular conditions of installation and/or handling may create unfore-
seen situations beyond the installer's control which will require case-by-case evalu-
ation of residual risks. We recommend keeping the following in mind:
Always handle the machine with care to avoid the danger of its falling.
•
The packing materials (carton, cellophane, staples, polystyrene, etc..) can cut,
•
wound or create hazards if used improperly or handled carelessly. Store such ma-
terials out of reach of children and irresponsible persons.
This symbol on the appliance or package means that the appliance
•
must not be considered as normal household refuse but that it must
instead be delivered to an appropriate collection centre for the re-
cycling of electric and electronic appliances. Make sure that this
appliance is disposed of correctly and you too will be making your
contribution to the prevention of negative effects on health and the
environment, which could otherwise be caused by inadequate disposal. Recycling
materials helps to preserve our natural resources. For more information about
how to recycle this product, you can contact your local council office, local refuse
disposal service or the retailer from whom you purchased the appliance.
Before carrying out any installation or adjustment process, be sure to have read
•
and thoroughly understood the warnings in this manual.
The company cannot be held liable for any damage to people or property resulting
•
from failure to respect the instructions concerning safety, installation and mainte-
nance contained in this manual.
The power cord of this appliance must never be replaced by the user. In the event
•
of damage, switch off the appliance and only contact professionally qualified
technicians for its replacement.
Should you decide to no longer use this type of appliance, we recommend that
•
you make it inoperative: unplug the appliance from the mains socket and cut off
the power cord.
All defects and/or anomalous machine behaviour should be reported immediately
•
to authorized installation and/or maintenance personnel.
Before connecting the machine, check that electrical power supply corresponds to
•
the specifications on the data plate.
Should the machine plug not be compatible with your socket, have the plug re-
•
placed with a suitable type by a qualified technician, who should also check that
the section of the wires supplying the power outlet is suitable for the machine
power requirements.
Avoid use of multiple-plug adapters and extension cords.
•
The ground wire must be connected; the electrical system must meet the stand-
•
ards set by local safety laws and regulations.
6
Publicidad
