Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION | P24
Hints & Tips
Vacuum Packaging First Aid Kits
Vacuum packaging first aids kits to store in your home, boat or car is a great way to
keep items dry and free from dirt and mould. Also consider vacuum sealing flares,
batteries, flashlight, candles and matches.
Vacuum Packaging for Outdoor Activities
When camping vacuum packing your clothes can save space in your bag and keep dry
at the same time. Also, vacuum seal your maps, matches and snacks.
Vacuum Packaging Paint Brushes
When painting around the home you can vacuum package your wet paint
brushes between coats rather that washing. This is particularly useful
for oil based paints that require mineral turpentine to clean.
Vacuum Packaging Ice
You can vacuum package ice to use as an icepack for picnics and other outdoor
activities. When the ice melts you then have fresh drinking water or refreeze to use
again as an icepack.
Scan the QR code to find more hints and tips to get the
most out of vacuum sealing:
Nothing happens when I try to vacuum seal a bag
•
Check power cord to see if it is firmly plugged into electrical outlet.
•
Examine power cord for any damage.
•
See if electrical outlet is functioning by plugging in another appliance.
•
Make sure the bag is placed correctly inside vacuum chamber and beneath the air
intake.
•
Make sure there is 5cm of flat bag between the top of the item in the vacuum bag
and the dual seal strip. The bag needs to be completely flat on the dual seal strip.
Air is not removed from the bag completely
•
To seal correctly, the open end of the bag should be resting entirely inside the
vacuum chamber area.
•
Check the dual seal strip and the foam gaskets are free of any food residue.
•
Make sure both the upper and lower foam gaskets are flat in their grooves and
not compressed or damaged in anyway. You can try flipping the foam gaskets
over if needed. Wipe clean and smooth them back into place if needed.
•
Vacuum bag may have a leak. To test, seal the bag with some air in it, submerge in
water, and apply pressure. Bubbles indicate a leak. Reseal or use another bag.
•
Use only the specified vacuum bag with vacuum channels provided by Luvele.
•
Leaks along the seal can be caused by wrinkles, debris crumbs, grease or liquids.
Reopen bag, wipe the top inside of the bag and smooth it out along the sealing
strip before resealing.
•
There is a vacuum pressure sensor built in this machine. The machine will not turn
to seal automatically if the vacuum pressure inside the bag is not able to reach the
predetermined vacuum pressure. Check dual seal strip and the foam gaskets for
debris and correct position. Wipe clean and smooth them back into place, and try
again.
INSTRUCTION | P25
Troubleshoot
Publicidad
